S1000RR Race Fairings - Aerodynamics, Protection, Top Brands

An Introduction to S1000RR Race Fairings

Race fairings are an important component for the BMW S1000RR superbike. Installing a set of race fairings helps improve the bike's aerodynamics and cooling while providing crucial protection on the track. Aftermarket options from top brands allow riders to customize the look and function of their S1000RR.

Aerodynamics and Improved Cooling

The curved, flowing design of S1000RR race fairings improves airflow around the bike. This both enhances stability at high speeds and facilitates better engine and brake cooling. Large vents channel wind through the fairing to key components. Strategically shaped fairing sections also reduce drag compared to the stock bodywork.

By managing airflow more efficiently, race bodywork lets riders carry more corner speed and accelerate harder on straights without overheating. Fast riders or those competing in amateur and expert classes especially benefit from these performance upgrades.

Protection on the Track

Aftermarket race fairings shield the engine, frame, and electronics from damage while sliding. Reinforced mounting points and durable composite materials better withstand impacts too. Fairing kits designed specifically for track and competition use hold up to abuse much better than stock parts or street plastics.

Vital electronics like the ECU stay protected behind tough fairing walls. This added coverage gives riders confidence to push their machine harder, lower, and faster through turns. Durable race bodywork is essentially required equipment for more aggressive track day and club racing endeavors.

Popular S1000RR Race Fairing Brands

When upgrading an S1000RR with race bodywork, top manufacturers offer tailored fitment and elite performance. These leading brands craft innovative, attractive products from premium materials that meet the needs of both amateur and professional riders.

BMW Performance

As the bike's original producer, BMW offers the ultimate factory solution for competition plastics. Their HP race fairing kit provides an OEM fit manufactured to the same strict tolerances as stock panels. Sophisticated engineering considers real-world airflow management.

Angled air intakes route wind through the fairing to deliver superior cooling. Strategically shaped contours slice cleanly through the air for reduced drag up to speeds over 180 mph. Bold M Motorsport stripes and colors further set these race-bred fairings apart.

Ducabike

Italian specialist Ducabike produces race-ready S1000RR bodywork revered for exceptional performance and style. Their fairings come precisely molded to bolt directly onto stock mounting points using all the original hardware.

Wind-tunnel developed aerodynamics balance durability and weight savings with expanded venting for steering stability and engine cooling at extreme lean angles. With an exotic custom appearance, Ducabike fairings make a bold statement on any starting grid.

SharkSkinz

Well-known in the sportbike community, SharkSkinz crafts ultra-protective fairings strong enough for the rigors of motorcycle racing. Reinforced stress points, integrated air channels, and numerous mounting points ensure these ABS plastic fairings shrug off skids and crashes.

Each kit comes pre-drilled for easy installation using stock fasteners. Custom painting or wrapping allows for endless personalization possibilities too. SharkSkinz race products deliver durable performance and protection without breaking the bank.

Tips for Installing S1000RR Race Bodywork

While race fairing kits bolt up to factory mounting locations, some preparation helps ensure proper fitment. Carefully removing stock plastics, updating hardware, and test fitting pieces streamlines installation.

Remove the Original Fairing Pieces

Completely taking off the stock plastic bodywork provides unencumbered access for test fitting aftermarket race fairings. Inventory and set aside small brackets, reflectors, and hardware for reuse too. Check for cracked plastic tabs or damaged mounting holes to be repaired if needed.

Replace Any Stripped Fasteners

Over time vibration can damage many small screws that secure bodywork. Inspect and replace any corroded or stripped fasteners before attempting to mount upgraded race panels. This prevents problems torquing components to the recommended specs.

Test Fit Before Final Mounting

Dry test fitting race fairings checks overall alignment before final installation. Loosely secure each section with just a couple bolts first to identify potential issues. Some tabs or screw holes may need adjusting for a smooth, integrated appearance free of major panel gaps.

Taking these preparatory steps when replacing the stock S1000RR plastics with race bodywork ensures proper fitment. Then riders can fully secure their new aerodynamic race fairings knowing that top performance and dynamic styling will follow on every ride.

FAQs

What are the main benefits of installing race fairings?

Race fairings improve the S1000RR's aerodynamics for better high speed stability and engine cooling. They also provide crucial impact protection when sliding in a crash on the racetrack.

Do aftermarket fairings offer any performance gains?

Yes, race fairings can provide measurable performance improvements. More efficient airflow cools key components better so the engine and brakes work optimally during aggressive track riding sessions.

Will race bodywork fit properly on my stock BMW?

Reputable brands design their S1000RR fairing kits to bolt directly onto the factory mounting points for a precise OEM fit. Minimal adjustment is needed during installation.

What preparation is required before mounting new fairings?

It's best to fully remove the stock plastics first. Then inspect and replace any damaged or corroded mounting hardware before test fitting the new race fairings. This ensures proper alignment and fit.