Detect Home Water Leaks Early with Blue Monster System

Detecting and Repairing Water Leaks with Blue Monster Leak Detector

Finding and repairing household water leaks can be a difficult task. Water leaks often go unnoticed, causing extensive damage and driving up water bills. Using a leak detection system like Blue Monster can make finding and repairing leaks much easier.

How Blue Monster Leak Detector Works

Blue Monster leak detector is a system that uses acoustic sensors to listen for the sound of running water in pipes. When a leak occurs, water running through the pipe creates noise that the sensor can detect. Blue Monster has sensors that can be attached to water pipes throughout the house, allowing you to monitor your entire plumbing system.

The sensors connect wirelessly to a control panel. When they detect the sound of a water leak, they send a signal to the control panel. The panel then alerts you via alarm, allowing you to locate and repair the leak. Some Blue Monster systems also use water sensors that can detect the presence of water leaking onto the floor.

Benefits of Blue Monster Leak Detection

Using a leak detection system like Blue Monster offers several benefits:

• Rapid leak detection - You don't have to rely on visual inspection or a spike in your water bill. The sensors alert you as soon as a leak begins.
• Prevent water damage - Catching leaks early prevents extensive water damage to walls, floors, and other structures.
• Save money - Repairing leaks quickly reduces wasted water and the cost of repairing heavy water damage.
• Whole home monitoring - Sensors can be placed throughout the home to monitor all pipes.
• Easy installation - The wireless sensors can be easily installed without major plumbing modifications.

How to Use Blue Monster to Find Leaks

Using Blue Monster leak detector involves three main steps:

1. Install sensors - The system comes with multiple acoustic sensors that get attached to water pipes in various locations. Ideally, sensors should be placed near potential problem areas. The control panel is also installed and connected to the sensors.
2. Listen for alerts - When a leak occurs, the control panel alarms to let you know a sensor has detected flowing water. The display panel identifies which sensor detected the leak.
3. Inspect and repair - Go to the location identified by the sensor and visually inspect to find the exact location of the leak. Turn off water supply lines as needed and repair the leak by replacing pipe sections, tightening fittings, replacing valves, etc.

Where to Place Sensors

Strategic sensor placement is important for the best leak detection. Recommended sensor locations include:

• Near water appliances - Dishwasher, washing machine, water heater
• Under sinks - Kitchen, bathroom, and utility sinks
• Near toilets and shower/bath valves
• In the basement or crawlspace - On water supply mains and branch lines
• Near outdoor spigots and pools/hot tubs

Focusing on these problem areas will help detect leaks quickly before major damage occurs.

Combining With Smart Water Shut-Off

For the best whole home leak protection, Blue Monster can be combined with an automatic water shut-off valve. This smart valve integrates with the Blue Monster system and automatically shuts off the water when a leak is detected. This prevents wasted water and minimizes damage until the leak can be repaired.

When to Call a Professional Plumber

While Blue Monster makes leak detection easy, some leak repairs should still be left to the professionals. Call a licensed plumber for:

• Major pipe leaks - Pipes that are split or have large holes.
• Slab leaks - Leaks in pipes under the foundation require specialized location and repair.
• Gas leaks - Never attempt to repair leaks on gas lines.
• Major appliance leaks - Some appliances like water heaters should be repaired by qualified pros.

For minor leaks on water supply lines and drains, Blue Monster provides the information you need to handle the repair yourself. But don't hesitate to call in a pro plumber for support with any leaks you don't feel comfortable handling.

Maintaining Your Blue Monster Leak Detection System

Like any system, some occasional maintenance is required to keep Blue Monster working properly:

• Replace batteries - The sensors run on batteries that must be replaced about once a year.
• Check connections - Make sure all sensor attachments and wireless connections are intact.
• Test the system - Run occasional tests by triggering the sensors to confirm they communicate properly with the panel.
• Update firmware - Download firmware updates for sensors and control panel when available.
• Clean sensors - Use compressed air to remove dust or debris from acoustic sensors.

Properly maintained, a Blue Monster system can provide years of reliable leak detection. Don't wait for your next huge water bill, get leak detection installed today.

FAQs

How accurate is Blue Monster leak detection?

Blue Monster sensors use advanced acoustic technology to listen for the sounds of water leaks. They are designed to detect even the smallest leaks and have an accuracy rate of about 95%.

What kinds of leaks can Blue Monster detect?

It can detect any leak that involves pressurized flowing water. This includes leaks in supply lines, plumbing joints, valves, appliances, etc. It generally cannot detect small drips or condensation.

How long do the batteries in the sensors last?

The battery life is about 1 year. Blue Monster sensors use lithium batteries designed for long life. The system alerts you when batteries run low.

Can Blue Monster sensors get wet?

The sensors are waterproof so they can withstand contact with water. However, they should not be submerged under standing water.

Does Blue Monster work with hard water systems?

Yes, the sensors use algorithms that account for the sound frequencies of both soft and hard water. Hard water deposits will not affect accuracy.