Blue Gold Degreaser for Removing Oil Stains on Concrete

Using Blue Gold Degreaser for Oil Stains on Concrete

Oil stains on concrete driveways, garage floors, and other surfaces can be extremely difficult to remove. Over time, the oil permeates into the porous concrete, leaving unsightly stains and grease marks. However, blue gold degreaser offers a powerful solution for tackling even the toughest oil-based stains on concrete.

Why Oil Stains Can Be So Hard to Remove from Concrete

Concrete is highly porous and permeable to liquids. When oil drips or spills onto a concrete surface, it quickly sinks in. Regular cleaning products or methods like sweeping simply won’t penetrate deep enough into the concrete to lift oil molecules and loosen their grip.

Oil is also thicker and slipperier than water. Detergents that work well for cleaning grease off other surfaces will simply run off oil on concrete without lifting the stain. Stronger solvents are needed to break down that slippery barrier.

What Makes Blue Gold Degreaser So Effective?

Blue gold degreaser contains powerful solvents and surfactants designed specifically for heavy duty oil stain removal including:

• D-Limonene – A citrus-based solvent derived from orange peel oil that cuts through fatty acids.
• Ethoxylated alcohol – A surfactant that helps lift oil off the surface by emulsifying it.
• Sodium hydroxide – Alkaline agents like this help break down oil on a molecular level.

These active cleaning agents penetrate deep into concrete to attack oil stains right at the source. The blue tinting also makes it easy to see where you have applied the degreaser to prevent missing any stained spots.

Tips for Using Blue Gold Degreaser on Concrete

Here are some key tips for effectively using blue gold degreaser to remove oil stains from concrete surfaces:

1. Test on a small, inconspicuous area first. Check for any discoloration or damage to the concrete, which is unlikely but possible on some surfaces.
2. Apply a thick layer of degreaser directly onto the oil stained area, spread with a scrub brush.
3. Let it soak for 5-10 minutes so the active agents can fully penetrate and lift stains.
4. Scrub vigorously with a stiff brush to bring deep stains to the surface.
5. Rinse thoroughly, a pressure washer can help blast away lifted oil and grime.
6. Repeat as needed for tough, stubborn stains. It often takes multiple applications.
7. Allow concrete to fully dry. Check for any remaining stain residue and spot treat if needed.

Powerful Stain Removal with Minimal Effort

Blue gold degreaser gives power washing pros, facility managers, and DIY homeowners an easy, effective way to take on one of the toughest cleaning challenges – concrete oil stains. Without requiring hazardous chemicals or extensive manual scrubbing, it lifts embedded oil off of garage shop floors, driveway surfaces, parking garages, and more with minimal time and effort.

Tackling concrete stains has never been simpler thanks to the stain-fighting strength of degreasers like the iconic blue gold formula. Just apply, let it penetrate, scrub lightly to bring stains to the surface, rinse, and repeat if necessary – restoring the clean, attractive look of oil-stained concrete quickly and safely.

FAQs

What types of surfaces can I use blue gold degreaser on?

Blue gold degreaser is safe for use on most types of concrete surfaces including driveways, garage floors, basement slabs, parking garages, walkways, patios, and more. Always test on a small, inconspicuous area first.

How long should I leave the degreaser on the oil stain?

Let the blue gold degreaser soak on the oil stained area for 5-10 minutes before scrubbing. This allows time for the active cleaning agents to fully penetrate the concrete and lift the stubborn stains.

Will blue gold remove stains other than oil?

Yes, blue gold is effective on many types of organic stains in addition to oils and greases. It can lift food stains, plant stains from leaves or grass, rust stains, mold stains, algae stains, and more.

Can I dilute blue gold degreaser to make it less harsh?

For most concrete applications, it is best to apply blue gold degreaser full strength for maximum cleaning power. If needed, you can dilute up to 2 parts water to 1 part degreaser for more delicate surfaces.