Bump Box Cone Filling Machines - The Fast and Easy Way to Fill Pre-Rolled Cones

Introducing the Bump Box Cone Filling Machine

Pre-rolled cones have become increasingly popular among cannabis consumers in recent years. The convenience of having a perfectly shaped cone ready to go is undeniable. However, manually filling dozens or hundreds of cones can be tedious and time-consuming. This is where the bump box cone filling machine comes in handy.

What is a Bump Box Cone Filler?

A bump box cone filler is an automated machine designed to quickly and efficiently fill large quantities of pre-rolled cones. It typically consists of a vibrating sloped tray that holds the empty cones, a reservoir above the tray to hold the ground cannabis, and a simple control panel. Bump box cone fillers allow you to fill 100 or more cones in just a few minutes!

How Does a Bump Box Cone Filling Machine Work?

The bump box uses vibration and gravity to fill the cones. Here is the general process:

1. Empty pre-rolled cones are loaded onto the vibrating sloped tray, with the wider opening facing up.
2. Ground cannabis is loaded into the reservoir above the tray.
3. When activated, the tray vibrates, moving the empty cones forward and back. At the same time, the cannabis falls from the reservoir onto the cones.
4. The vibration packs each cone evenly while the sloped tray guides excess cannabis into the next empty cone.
5. Within a minute or two, dozens of cones are perfectly packed and ready to go!

Advantages of Using a Cone Filler Machine

Bump box cone fillers offer several benefits for cannabis businesses and consumers:

• Speed - Fill 100+ cones in just a few minutes! A manual process takes vastly longer.
• Consistency - Vibration ensures each cone is evenly and properly packed every time.
• Efficiency - Pre-rolls can be produced in large quantities quickly and efficiently.
• Simplicity - Cone fillers have a basic control panel and straightforward operation.
• Cost Savings - Businesses can speed up pre-roll production while reducing labor costs.
• Convenience - Pre-rolled cones can be filled anytime without relying on skilled hand rolling.

Types of Bump Box Cone Fillers

There are a few different styles of bump box cone filling machines to consider:

• Small count - Typically fills around 20-50 cones at once. Great for personal use.
• Medium count - Fills approximately 50-100 cones per cycle. Ideal for small dispensaries and local businesses.
• Large count - High volume machines that can fill 150+ cones at once. Built for major pre-roll producers.
• Adjustable - Offers ability to customize vibration intensity and slope angle.
• Interchangeable trays - Allows switching out trays designed for different cone sizes.

Consider your production needs and scale when selecting a bump box cone filler size.

Key Features of Bump Box Cone Filling Machines

While designs may vary between different makes and models, here are some standard features found on quality bump box cone fillers:

• Durable stainless steel construction
• Customizable vibration intensity
• Interchangeable trays for multiple cone sizes
• Slope angle adjustment
• Safety cut-off switch
• Built-in tamper tool for compacting cannabis
• Kief and oil tray attachments
• Digital timer with auto shutoff
• Easy disassembly for cleaning

Advanced options like smartphone app controls, vacuum sealing, and packaging integrations are also available on select high-end models.

Using Kief and Oil with Cone Fillers

One great advantage of bump box cone filling machines is the ability to easily incorporate kief and cannabis oils into your pre-rolls.

A kief tray attaches over the standard herb reservoir, allowing you to perfectly spread dry kief onto cones as they are filled. The result is pre-rolls dusted with kief for added flavor, aroma, and potency.

Oil trays attach in place of the standard trays. Channels in the trays allow measured amounts of cannabis oil to flow directly into each pre-roll for a boosted infusion of concentrate.

Combining kief, oil, and flower together in pre-rolls creates a truly elevated smoking experience from start to finish!

Maintenance Tips for Cone Filler Machines

Like any equipment, following proper maintenance practices will keep your bump box cone filler running smoothly:

• Frequently disassemble and clean all parts with isopropyl alcohol, especially the trays.
• Inspect vibration motor mounts and tighten if needed.
• Lubricate sleds, bearings, and moving joints as required.
• Check electrical connections periodically and replace worn cords.
• Empty and wipe out herb and kief reservoirs after each use.
• Always store in a clean, dry location when not in use.

Safety Tips for Cone Filling

While box cone fillers are relatively safe devices, following basic safety tips will prevent accidents and injuries:

• Use only properly dried and cured cannabis to prevent mold issues.
• Do not overfill the herb reservoir to avoid clogs and jams.
• Never place fingers under the vibrating tray while operating.
• Turn off and unplug unit when cleaning, loading, or servicing.
• Keep electrical cords away from heat sources and liquids.
• Position machine on a stable, level surface when operating.

Experience the Benefits of Automated Cone Filling

Bump box cone filling machines revolutionize pre-roll production. With the ability to perfectly fill 100+ cones in just minutes, businesses can eliminate tedious manual labor while standardizing quality. Consumers also appreciate the convenience of being able to quickly fill cones anytime. If you want to save time and scale up your pre-roll output, a bump box cone filler is an excellent investment!

FAQs

How many pre-rolled cones can a bump box fill at one time?

Bump box cone filling machines can fill anywhere from 20 cones up to 150+ cones in a single cycle, depending on the size of the machine. Larger industrial cone fillers maximize efficiency by packing over 100 cones per batch.

What types of cones are compatible with cone filling machines?

Most standard 1 1/4" size pre-rolled cones with a wider open end and tapered body will work in a bump box filler. The machines often come with interchangeable trays to accommodate different cone lengths. You can use regular paper cones, hemp wraps, palm leaf wraps, and more.

Can a cone filling machine be used for blunt wraps?

Unfortunately blunt wraps are not well suited for automated cone fillers. The lack of a cone shape makes it difficult for the wraps to properly sit in the trays. However, some industrial machines may be capable of filling blunts with special modifications.

How long does a bump box cone filler last?

With proper maintenance and cleaning, a quality bump box cone filling machine can provide years of reliable service. The lifespan depends on factors like construction materials, usage frequency, and care. Commercial-grade stainless steel machines tend to be the most durable.

What materials are bump box cone fillers made from?

Bump box cone filling machines are typically constructed from powder coated steel, stainless steel, or thick plastics like ABS. Stainless steel offers maximum durability for frequent commercial use. Plastic models work well for lighter home usage.