Autovent 3000: A High Performance Crankcase Ventilation System

Understanding the Autovent 3000 System

The autovent 3000 is an important ventilation system used in many modern vehicles. As interest in high-performance vehicles continues to grow, auto enthusiasts are paying more attention to critical systems that optimize engine operation, including ventilation.

How an Autovent 3000 System Works

An autovent 3000 system serves to properly ventilate the vehicle's crankcase. It works by taking advantage of pulses of pressure in the intake manifold to create a vacuum that draws out gasses from the crankcase. This prevents pressure buildup and recycles these gases through the combustion chamber instead of releasing them into the atmosphere.

The "3000" in the name refers to the rated airflow capacity of 3000 cubic feet per minute. This level of airflow ensures optimal crankcase ventilation and pressure control for high-performance engines.

Benefits of the Autovent 3000

There are several key benefits provided by the autovent 3000 system over more basic crankcase ventilation setups:

• Prevents power-robbing vacuum leaks
• Lowers emissions
• Promotes optimum engine performance
• Made for high-RPM engines
• Lightweight and corrosion resistant

By upgrading to an autovent 3000, drivers can realize noticeable gains over stock ventilation systems. Engines will breathe easier, last longer between oil changes, and simply run better.

Considerations for Autovent 3000 Installation

Those looking to upgrade their ventilation with an autovent 3000 will need to take some important considerations into account:

Check Compatibility

The autovent 3000 is designed as a universal crankcase ventilation solution. However, it's important to verify fitment for your particular vehicle before purchasing. The size and shape of intake openings can vary across engine designs.

Tuning Required

Simply bolting on an autovent 3000 isn't enough to realize the full benefits. The ventilation rate can have a dramatic impact on the engine's air/fuel ratio. Most installers will need to recalibrate their ECU after installation to account for changes in airflow.

Maintenance

While the autovent 3000 system is low maintenance compared to some other aftermarket upgrades, it still requires periodic attention. The filter and hoses should be inspected every 6 months or 3000 miles to check for obstructions and leaks.

Buying an Auto Vent 3000 System

Those ready to upgrade can buy an autovent 3000 system either online or from specialized retailers of performance parts:

Online Options

Many online retailers like Summit Racing and Jegs offer the autovent 3000 for order via their websites. This convenient option allows buyers to get free shipping right to their door.

Local Performance Shops

Supporting local speed shops is another great option for getting professionally fitted for an autovent 3000 system. Stores specializing in upgrades will have the most experience installing and tuning them.

Expect to invest $300 to $700 for an autovent 3000 setup with all necessary hoses and hardware. This reasonably priced upgrade offers outstanding bang for the buck when it comes to unleashing more power from an off-the-shelf engine.

Autovent 3000 on Custom Performance Engines

Those running custom-built racing engines can also benefit greatly from an upgraded autovent 3000 ventilation system over stock. Their ultra-high RPM capabilities demand unrestricted ventilation to prevent oil leaks while sustaining hard use.

Professional builders designing custom crankcase ventilation setups will likely tune them using an autovent 3000 or similar high-flow system. This fine-tunes ventilation rates to precisely match the engine's demands under max load.

High-Flow Ventilation Critical for Performance

Upgraded ventilation like that offered by the autovent 3000 plays an indispensable role in supporting engines modified aggressively for more power. Simply drilling and boring out factory parts can't provide the needed capabilities.

With an autovent 3000 system installed, builders can push their custom engine designs to the bleeding edge without worrying about insufficient crankcase ventilation holding them back.

So whether upgrading a stock vehicle or maxing out a custom race engine, the autovent 3000 system should definitely be on any gearhead's radar. It delivers the serious airflow required in order to fully realize the potential of modern high-performance engine packages.

FAQs

What vehicles is the autovent 3000 compatible with?

The autovent 3000 is designed as a universal crankcase ventilation upgrade, however it's important to verify fitment for your particular vehicle before purchase. Intake openings vary across engines.

Do I need to tune my engine after installing an autovent 3000?

Yes, it's highly recommended to recalibrate your vehicle's ECU after installing an autovent 3000. The increased airflow can impact air/fuel ratios, so tuning helps your engine take full advantage of the upgraded ventilation system.

How often do I need to service my autovent 3000?

General maintenance guidelines are to inspect the autovent 3000 filter and hoses every 6 months or 3,000 miles. This ensures you catch any potential obstructions or leaks before they impact performance.

Can I install an autovent 3000 on my custom performance engine?

Yes, custom built racing engines specifically benefit from high-flow ventilation upgrades like the autovent 3000. It's crucial to match ventilation rates to the engine's max RPM capabilities under heavy loads. Professional engine builders often customize autovent 3000 systems.