Powerful Magic Pressure Washers for Cleaning Bounce Houses

The Power of Magic Pressure Washers

Pressure washers are invaluable cleaning tools that utilize the power of water pressure to tackle even the toughest dirt, grime, and stains. And when combined with the right detergents and accessories, pressure washers transform into "magic" cleaning weapons.

How Do Magic Pressure Washers Work?

A pressure washer works by sending water through a pump to accelerate the flow, increasing water pressure. Most consumer-grade pressure washers have an electric-powered pump and can reach pressures between 1,300 to 1,800 PSI. Gas-powered commercial pressure washers are even more powerful with pressures exceeding 4,000 PSI.

This focused, high-pressure spray of water blasts away stubborn substances much more effectively than a regular hose or low-pressure nozzle can. Dirt, mud, oil, mold and mildew, chewing gum remnants, and more are no match against a pressure washer!

Supercharging with Detergents

You can supercharge a pressure washer’s cleaning ability by adding a detergent to the mix. Many pressure washers have a built-in detergent tank and injection system for seamlessly integrating soap. Detergents help lift dirt and grime so that the pressure spray can rinse it away more easily.

Choosing the right cleaner or degreaser for your needs helps a pressure washer live up to its “magic” moniker. Vehicle and boat wash, driveway and sidewalk cleaners, house and siding wash, concrete and deck cleaners, and more target specific cleaning jobs. The cleaning chemical loosens substances while the pressure does the rinsing and scrubbing!

Surface Cleaner Attachments

Another accessory that unlocks a pressure washer’s full potential is a surface cleaner attachment. These attachments consist of a rotating spray bar with jets angled to scrub a set surface area. The spinning jets provide wider cleaning coverage compared to a single focused spray.

Surface cleaner attachments allow you to methodically clean flat areas like sidewalks, driveways, decks, patios, and other surfaces more quickly. The consistent, even application prevents leaving unwanted streaks or lingering dirt in between passes.

Erasing Years of Grime and Neglect

A magic pressure washer combo can erase years of grime and neglect, restoring surfaces back to nearly new condition. Grime-encrusted driveways regain a bright clean sheen. Moldy siding appears freshly painted. Grease-stained concrete sparkles again. A magic pressure washer makes these cleaning marvels possible.

Pressure Washing a Bounce House

Bounce houses and other inflatable party equipment get subjected to all manner of dirt, from grass stains to food spills to muddy shoe prints. Frequent cleanings keep inflatables looking their best so they stay fun and appealing for young partygoers.

A thorough bounce house cleaning after each rental or use prevents permanent stains from setting in. And magic pressure washers speed up the cleaning process drastically compared to manual scrubbing.

Step 1: Set Up Properly

Start by laying out the deflated bounce house in an accessible outdoor area. Clear any debris and bystanders from the area first. Drape the bounce house over a raised platform, sawhorses, or other structure so the bottom is elevated off the ground. This allows you to spray both the inside and outside effectively.

Step 2: Remove Loose Debris

Use a leaf blower, broom, vacuum or other tool to remove any loose dirt, leaves, or debris from the bounce house surfaces first. This prevents the pressure washer from accidentally spraying the debris deeper into the fabric.

Step 3: Apply Cleaning Solution

Fill up the pressure washer’s detergent reservoir with an all-purpose cleaner or degreaser solution. Apply the detergent liberally across all accessible bounce house surfaces before power washing. Let it soak for 5-10 minutes. The cleaning chemicals help dissolve organic deposits so they wash away cleaner.

Step 4: Pressure Wash Surfaces

Thoroughly spray down all inside and outside bounce house surfaces with the pressure washer. Concentrate on visibly soiled areas first. Adjust the spray nozzle angle and distance as needed based on soil type and fabric sensitivity. Allow the bounce house to fully air dry afterward.

Step 5: Spot Clean Stubborn Stains

For any remaining tough stains, grab a brush and manually spot clean using a mix of hot water, magic eraser, and/or scrub pad. Combining pressure washing with some elbow grease knocks out the most stubborn stains.

Step 6: Sanitize and Deodorize

Mist down the cleaned bounce house with a sanitizing spray containing bleach or quaternary ammonium salts. This kills any lingering bacteria. Follow up with an odor eliminator spray if needed to keep inflatables smelling fresh.

Choosing the Best Pressure Washer

Investing in the right pressure washer saves hours of cleaning time and delivers better results. Consider the following factors when selecting a bounce house-cleaning pressure washer:

Cleaning Power

Look for a pressure washer with at least 1,800 PSI and 1.5 GPM for the best bounce house cleaning performance. Models in the 2,000 to 3,000 PSI range make quick work of caked-on grime.

Portability

Clean inflatables on-location at birthday parties, events, etc. Compact hot water pressure washers with large rear wheels and handles provide superior mobility.

Onboard Detergent Tank

Built-in soap tanks that inject cleaners into the spray eliminate the need to premix solutions beforehand. Just fill and go!

Nozzle Tips

Look for a pressure washer bundled with multiple high-quality quick connect spray nozzles. Adjustable tips let you tailor the spray’s intensity and width as needed.

Warranty

With frequent commercial use, invest in a pressure washer from a leading brand that offers a 3-5 year extended warranty for peace of mind.

The right pressure washer saves hours of exhausting scrubbing and delivers sparkling clean bounce houses customers expect. Combine a powerful washer with multi-surface detergents and scrub pads for a true magic cleaning solution!

FAQs

What PSI do I need to clean a bounce house?

Look for a pressure washer with at least 1,800 PSI for effective bounce house cleaning. Models in the 2,000-3,000 PSI range make quicker work of caked-on dirt and stains.

What kind of detergent should I use?

Use a detergent made specifically for pressure washers. Options like bounce house cleaners, vehicle wash, concrete wash, etc. help lift organic debris so the pressure can rinse cleanly.

How do I pressure wash properly?

Always drape inflatables over a raised surface first. Remove loose debris. Apply detergent liberally and let soak for 5-10 minutes before power washing. Rinse inside and out methodically. Let air dry completely.

Should I invest in accessories?

Yes, accessories like surface cleaners, rotating brushes, and specialized nozzles help optimize cleaning performance for different situations.