Guide to Kangen Water Ionizer Machine Parts and Replacements

Introduction to Kangen Water Machines and Parts

Kangen water machines, produced by Enagic, are alkaline water ionizers that use electrolysis technology to produce ionized alkaline and acidic waters for drinking and household use. These machines have become popular for their reported health benefits and uses around the home.

Like any appliance, Kangen machines have several parts that work together to produce the ionized waters. Understanding what these parts are and how they function is important for proper maintenance and operation.

Key Parts of a Kangen Water Ionizer

There are five main components that make up a Kangen water ionizer:

• The ionizer chamber
• Electrodes
• Filters
• Control panel
• Power supply

The Ionizer Chamber

The ionizer chamber is the main body of the Kangen machine where electrolysis takes place. Inside the chamber are the electrodes which ionize the water as it flows through.

Chambers come in different plate sizes which determine the machine's filtering capacity and electrolysis strength. More plates equal more ionization power.

Electrodes

The electrodes are conductive plates made of platinum-dipped titanium. They apply an electrical charge to the water, which causes positive hydrogen ions and negative hydroxide ions to separate.

This ion separation is what makes the alkaline and acidic waters with different pH levels that have health benefits and cleaning uses.

Filters

Kangen machines have multiple filters that purify the source water before it gets ionized. They remove dirt, chlorine, metals, and impurities that impact ionization effectiveness and healthiness.

Higher end Kangen models have more filter stages providing cleaner, healthier water output.

Control Panel

The digital control panel allows you to control and monitor the ionization process. You can select the pH level and volume of water to produce.

Higher end models also track filter usage and include self-cleaning options.

Power Supply

The power supply converts AC power from your wall outlet into the low voltage DC current needed to power the electrolysis operation.

Kangen power supplies are designed for stability and safety.

Common Replacement Parts

Over time, certain Kangen components wear out and need to be replaced to keep the machine functioning properly. Some common replacement parts include:

• Filters
• Electrodes
• Membranes
• Hoses
• O-rings

Filters

Filters need to be replaced every 6-12 months depending on water usage. Using dirty filters blocks water flow and hampers ionization.

Electrodes

Electrode plates may need to be replaced every 2-3 years. Their titanium coating wears off over time reducing ionization performance.

Membranes

Membranes sit between the electrodes helping to guide the water flow. They wear out over years of use and need replacing.

Hoses

Plastic tubing and hoses start to crack after several years. Replacing them prevents leaking and water damage.

O-Rings

O-rings provide critical seals between components. Dried out or cracked o-rings cause leaks and should be promptly replaced.

Where To Purchase Replacement Parts

Replacement Kangen water parts can be purchased directly from Enagic. As the manufacturer, they have all the genuine factory components guaranteed to fit and function.

Some online retailers also carry aftermarket and used Kangen parts which serve as lower cost alternatives. However quality and compatibility is not always guaranteed.

Before ordering any parts, check that you are ordering the correct part number for your specific Kangen machine model. Provide your machine's 7 or 11-digit serial number to ensure an accurate fit.

Conclusion

Kangen water ionizers are comprised of several key components such as electrodes, filters, control panels, and ionization chambers. Over years of use parts like filters, electrodes, membranes, and hoses wear out and need replacement.

Purchasing genuine OEM parts from Enagic or checked compatible parts from third party vendors will keep your Kangen machine running optimally for years to come.

FAQs

How often do I need to replace the filters in my Kangen machine?

It is recommended to replace your Kangen filters every 6-12 months depending on your usage levels. Higher water throughput means more frequent replacement needs.

Where is the best place to buy replacement parts for my Enagic ionizer?

Enagic as the original manufacturer is the best place to buy genuine OEM replacement parts for Kangen machines. This guarantees accurate fit and designed functionality.

Do all the hoses need to be replaced at once?

No you do not need to replace all the tubing and hoses together. Just replace any that are showing wear, cracks or damage. An advantage of genuine hoses is that you can buy them individually.

Can I just put any replacement electrodes or membranes into my machine?

No you shouldn't install any random third party electrodes or membranes. They likely won't fit right or perform to standards. Always make sure new internal parts match what came standard with your machine to ensure good performance.